Configuration

Nuix RESTful Service supports clustered installations to enable distributed workloads across multiple nodes within a cluster. When configured as a cluster, requests submitted to REST are managed and distributed across the cluster with no further action from the user.

Clustering concepts

A clustered environment consists of two or more Nuix RESTful Service instances that have been configured to communicate and share data with each other over a network. Each instance represents a node within the cluster. Nodes are further classified by roles, which are defined during setup and determine what function the node can perform within the cluster. The following two roles are available.

• Producer role: Nodes that are assigned the producer role function as the primary server (base URL) for all calls submitted to the API. Producer nodes are responsible for receiving incoming calls, queuing requests, processing non-cluster-enabled functions, and relaying results from across the cluster back to the user.
• Consumer role: Nodes that are assigned the consumer role are responsible for performing the cluster-enabled requests in the job queue based on the node’s capacity and availability.

As requests are submitted to the cluster, they are picked up and processed immediately. If the cluster is at capacity, the requests will instead be added to a queue and processed by the first consumer node that becomes available or gains additional capacity.

Consumer nodes can accept new requests if the following criteria are met:

1. The request is for a cluster-enabled function.
2. The request can be performed immediately.
3. The case associated with a request is available to the node.
4. The node has capacity, which is defined by the following restrictions:
   • Worker-based tasks: Limited to one request per node simultaneously. Support for multiple simultaneous requests can be enabled by configuring the max.workers application.properties for each node.
   • Non-worker-based tasks: Can perform multiple requests simultaneously.
   • Based on the resources available to the node, it may be capable of performing both types of requests simultaneously.

If any of the criteria cannot be met by a consumer node, the request will remain in the queue until another node within the cluster becomes available.

License management

When starting a new session, you have the option to request a specific license type when acquiring an authentication token. Generally, the license type selected is chosen based on the tasks to be performed during the session. This selection, however, may not be the best fit for all requests being made during the session. In high production environments, being able to manage the license types used for synchronous and asynchronous based tasks can help prevent valuable licenses from being used in a non-optimal manner.

In clustered environments, this type of management can be achieved by configuring the cluster.license property within the application.properties file of Producer nodes within the cluster.

cluster.license=<licenseShortName>

When configured, Producer nodes, which are responsible for performing all synchronous based tasks within the cluster, will acquire only the license type that is specified by the property, regardless of the license type requested by the user at the start of their session. The acquired license will also be provisioned with the minimum number of workers allowed for the chosen license type, as determined by the Nuix Engine.

Server tags

To optimize and steer the distribution of requests throughout a cluster, server tags can be implemented to control the type of requests that are performed by specific nodes. Server tags are simple user-defined labels, such as OCR or Worker-Based, that are applied to consumer nodes during clustering setup.

Once configured, requests that are submitted with a specific server tag will be routed to and processed by a node that has a matching tag. Requests submitted without a tag will continue to be processed by the first available consumer node.

The practice of server tagging can be beneficial if trying to prioritize calls that are submitted to the API. For instance, separating worker-based requests from non-worker-based requests. Functions that require workers, such as ingestion, OCR, and exports can often be long running resource intensive processes. By using server tags, these types of requests can be steered towards dedicated nodes within the cluster that are better provisioned to handle these types of jobs.

Prerequisites

To set up a Nuix RESTful Service clustered environment, the following prerequisites must be met:

• Two or more installed instances of Nuix RESTful Service.
  • The IP addresses of all nodes included in the cluster must be known to complete the following configurations.
• Access to Nuix Licensing using any of the following options:
  • Nuix Management Server (NMS)
  • Nuix Cloud License Server (CLS)
• Networked file storage for shared resources.
• Elasticsearch v7.8.1

Network share requirements

Clustering requires the use of networked file storage to ensure all nodes within the cluster have access to the same data. Before you begin, ensure that a network file share is available and accessible from all nodes included in the Nuix RESTful Service cluster.

The following directories must be created and configured as individual network shares:

Configuring REST instances

To set up a clustered Nuix RESTful Service environment:

1. Ensure that the instance of Nuix RESTful Service being modified has been stopped.
2. Navigate to the settings directory within the Nuix RESTful Service installation.
   • Windows: <InstalDir>/Nuix/Nuix RESTful Service/settings
   • Linux: /opt/nuix-restful-service/settings
3. Open the application.properties file within a text editor.
4. Modify the file by configuring the following properties to enable clustering and identify the role of the node within the cluster.

   1. Enable the node to participate in the cluster by adding the following property:

      cluster.enabled=true
      

   2. Add one of the following properties to specify the node’s role within the cluster:

      • Producer role: The primary server for all calls submitted to the API. Producer nodes are responsible for receiving incoming calls, queuing requests, and relaying results from across the cluster back to the user.
      • Consumer role: Consumer nodes are responsible for performing the queued requests based on the node’s availability.

      cluster.roles=producer
      

      Note: The cluster must contain at least one producer and consumer node.

   3. Optionally, if configuring a Producer node, specify a license type for the node to use.

      cluster.license=enterprise-workstation
      

   4. Optionally, define a server tag that can be used to steer requests to this specific node.

      server.tags=Worker-based
      

      If the node is expected to receive multiple types of requests, a comma separated list of tags can also be defined:

      server.tags=Worker-based,OCR,Export
      

   5. Update the values of the following existing properties to reflect the UNC paths of the network share locations that were previously created .

      exportsFolder=\\10.130.138.177\exports
      inventoryLocations=\\10.130.138.177\cases
      searchThumbnailsExportDirectory=\\10.130.138.177\thumbnails
      userScriptsLocation=\\10.130.138.177\scripts\
      nuix.engine.userDataDirs=\\10.130.138.177\user-data\
      

   6. Add the following property to identify nodes within the cluster. Provide a comma-separated list of IP addresses that represent all nodes included within the cluster.

      hazelcastTcpIpMembers=<IPofNode1>,<IPofNode2>,<IPofNode3>
      

   7. Verify that the publicURL property is set to an address that is accessible from all other nodes within the cluster.

5. Save and exit the file.
6. Restart Nuix RESTful Service.
7. Repeat this procedure until all nodes within the cluster have been configured.

Viewing the cluster

After all nodes within your environment have been configured for clustering, you can check your cluster by submitting a GET request to the /cluster endpoint. This request should be submitted to a node within the cluster that has been configured with the producer role.

curl -L -X GET 'http://10.30.100.58:8080/nuix-restful-service/svc/v1/cluster' \
-H 'nuix-auth-token: 49e225d7-b88d-4d1b-9cbc-296e83706a60'

{
    "nodes": [
        {
            "hostAddress": "192.168.7.32",
            "hostName": "node01.nuix.com",
            "port": 5601,
            "details": {
                "serverId": "637edbff-3e1c-4f63-921e-da022a763fbf",
                "publicURL": "http://10.30.100.58:8080",
                "name": "REST-Node-1",
                "tags": [OCR,Export],
                "guid": "210ee909-3cdf-3f3a-b973-2cf4d7c7aea2"
            }
        },
                {
            "hostAddress": "192.168.7.12",
            "hostName": "node02.nuix.com",
            "port": 5602,
            "details": {
                "serverId": "432iunff-5h1a-8j67-738b-ic9344f643unf",
                "publicURL": "http://10.30.100.83:8080",
                "name": "REST-Node-2",
                "tags": [Worker-based],
                "guid": "468uj828-7uct-6h1s-m878-5hg5d9v6ema1"
            }
        }
    ]
}

After submitting the request, details about each available node are returned, including:

• The name and location of the node.
• The port where the node is operating.
• Any server tags associated with the node.
• A unique server GUID, useful for identifying a specific node.

Submitting requests to the cluster

When operating within a clustered Nuix RESTful Service environment, the process of submitting requests is no different from interacting with a single instance of Nuix REST.

To get started, you need to know the location of a node within the cluster that has been designated as a Producer. If multiple producers are available, any one can be used. Once identified, all calls to the cluster should be made to that node.

After a request is received, if the call is for a cluster-enabled function, the request will be added to the queue for the first available consumer node to pick up. If the call is for a non-cluster-enabled function, the producer node will simply perform the request itself.

Cluster-enabled functions are those that can be run asynchronously by any consumer node within the cluster. These functions are identified within the embedded API reference documentation (localhost:8080/nuix-restful-service/svc/docs) using the Cluster Enabled Operation label.

Submitting requests with server tags

If server tags have been implemented within your cluster, you can use them in your calls by defining the following RAW data in the body of your requests.

--data-raw 
'{
  "restClusterSettings": {
      "nodeTags": {
          "defaultTags": ["Worker-based"]
      }
  },
}'